Vauxhall Cresta Pas & Pad (1958-59)
The Car
Coming soon
The Specs
Below are the technical specifications and any performance numbers we could get.
Engine
Bore & Stroke |
79.375mm x 76.2mm |
Displacement |
2262cc |
Firing order |
1,5,3,6,2,4 |
Oil pressure (hot) |
25 – 35 lb./sq. in. |
Fuel Supply
Carburetor |
Zenith 34 VNT |
Choke |
29 |
Main |
115 |
Compensating |
100 |
Air Bleed F/T |
1.2 mm |
Slow Running |
55 |
Valving
Intake tappet clearance |
0.013″ (hot) |
Exhaust tappet clearance |
0.013″ (hot) |
Valve-timing indication |
Location marks on timing gears |
Intake valve opens |
19.6° BTDC |
Ignition
Breaker gap |
0.021″ – 0.023″ (New) 0.019″ – 0.021″ (Service) |
Plug gap |
S0.028″ – 0.030″ |
Ignition timing indication |
Engine side of flywheel |
Ignition timing |
9° BTDC |
Clutch
Clutch type |
Borg & Beck 8 A6 |
Clutch linings |
Zinc-reinforced wound asbestos yarn |
Brakes
Brake type |
Lockheed Hydraulic 2LS (front) L&Ts (rear) |
Brake linings |
Raybestos X30 |
Wheel Alignment
Toe-In |
1⁄8” at wheel rim |
Camber |
0° 38′ laden |
Caster angle |
2° laden |
King pin angle |
4° |
Keyword: Vauxhall Cresta Pas & Pad (1958-59)