GM’s Firebird I was the first gas-turbine car built and tested in the United States, and its Whirlfire turbine made 370 horsepower. Inside the company, however, the single-seater went by XP-21. The GM Firebird I looked like a fighter jet with wheels, and that was no styling trick: under the fiberglass sat an aircraft-style turbine instead of a piston engine. First, General Motors put the car on display at its 1954 Motorama show. Many dream cars of the era hinted at future styling. This one, by contrast, asked a bigger question: could a jet-age engine power an ordinary car one day? The answer turned out to be no, at least for the road. Even so, GM followed it with two more turbine Firebirds. It also gave the 1950s one of its wildest-looking machines. An engineering test that looked like a jet In fact, GM built the car to answer a practical question. According to the GM Heritage Collection’s page on the car, the Firebird I was an engineering and styling exercise. Its job was to test whether a gas turbine could be an efficient, economical powerplant for future vehicles. The same page also makes the car’s big claim in plain words. GM calls the 1954 XP-21 “the first gas turbine automobile ever to be built and tested in the United States.” That is GM’s own record, and it is why the car matters beyond its looks. Still, nobody at GM pictured it in a showroom. Conceptcarz notes that GM intended it strictly for the proving ground and the test track. In other words, the Motorama crowd saw a lab experiment wearing a show car’s clothes. Inside the 370-horsepower Whirlfire The engine had a name worthy of a comic book. GM called it the Whirlfire Turbo-Power, and it rated the unit at 370 horsepower. Mac’s Motor City Garage gives the factory designation as the Whirlfire GT-302. GM describes it as a single-stage, axial-flow turbine. Development happened under Charles McCuen, then general manager of the GM Research Laboratories Division. Meanwhile, Conceptcarz adds that Emmett Conklin led the gas turbine engine project itself. Here is the key difference from a jet plane. After all, a jet pushes itself forward with exhaust thrust through a tailcone. In contrast, GM says the Firebird I’s engine drove the rear wheels through a power turbine and a transmission, much like a conventional car. GM’s own figures for engine speed, however, don’t agree with each other. The text on its page gives 13,000 rpm for the power turbine, while the spec list says 26,000 rpm. Because GM’s two figures clash, we’ll leave the rpm question open and stick to the 370-horsepower rating both agree on. How the GM Firebird I got its fighter-jet body The shape came from the top of GM’s design studio. GM credits Harley Earl, its vice president of styling, with both the idea for the car and its aircraft-inspired body. For the shell, GM used fiberglass-reinforced plastic. Conceptcarz says the car has key features “reminiscent of the Douglas Skyray delta wing fighter jet.” For example, you can see it in the jet-like nose, the miniature wing and the vertical tail fin. The driver sat alone in a cockpit-style cabin, under what Mac’s Motor City Garage calls a flip-up plexiglass canopy. Even so, the wings weren’t just decoration. GM says engineers refined the body in the California Institute of Technology wind tunnel. As a result, that work set the wings’ negative angle of attack and the six-square-foot area of the tail fin. GM calls it one of the first uses of aerodynamic theory in car design. Wheelbase, weight and a test driver from Indy Under the skin, the numbers were compact. GM lists a 100-inch wheelbase and a weight of 2,800 pounds. Mac’s Motor City Garage adds a De Dion rear suspension and exposed front wheels. Meanwhile, the man at the wheel had serious credentials. According to Mac’s Motor City Garage, the test driver in GM’s 1954 film of the car was Mauri Rose. He was a three-time Indianapolis 500 winner who had become a GM engineering executive. Those demonstrations took place at GM’s former Desert Proving Ground in Mesa, Arizona. Mac’s notes that GM ran the turbine program from a dedicated research building at the GM Technical Center in Warren, Michigan. Today, however, that building no longer handles turbine work. What the first Firebird led to Then again, the Firebird I didn’t stay alone for long. Mac’s Motor City Garage calls it the first of GM’s experimental gas-turbine vehicles. Later, the Firebird II and Firebird III followed it, each one a fresh attempt at the same idea. In our view, that is the car’s real legacy. It proved a turbine could move a car on a test track, and it gave GM’s researchers a rolling lab. GM’s later Firebirds built on that start, but none of them got there first. The car’s place in history comes from GM’s own words. The company lists the 1954 Firebird I in its Heritage Collection as the first gas turbine automobile built and tested in the United States, rated at 370 horsepower.