The Chrysler Town & Country began in 1941 as a wooden-bodied wagon built on a sedan chassis, and the name stayed in Chrysler’s lineup for decades. Along the way it wore real ash and mahogany, plain steel and printed woodgrain. As a result, each change mirrored what American families wanted from a big car. Few of these cars set sales records. Instead, they earned their place slowly, at beach towns, country clubs and car shows. Today the wooden ones draw crowds, and even the later wagons have a loyal following. These are our picks, eight versions of the Town & Country that grew into collector favorites over time. The choice is our opinion, because no sales chart can measure that. However, every build number, engine figure and price comes from the museum records, period data and specialist histories we checked. 1. 1941 Chrysler Town & Country barrel-back wagon The first Town & Country was the idea of David Wallace, the Chrysler division’s general manager. He wanted a wagon with sleek lines and modern construction. So his team topped the Windsor six-cylinder chassis with a one-piece steel roof borrowed from Chrysler’s long-wheelbase sedan. That steel roof was a real step forward for wagons, as Mac’s Motor City Garage explains. Below it, meanwhile, sat a body of seasoned white ash framing and Honduras mahogany panels. At the back, a pair of center-opening wooden doors gave the rounded tail that earned the “Barrelback” nickname. Chrysler built 997 of them for 1941, including 200 six-seaters. Then production stopped in 1942 as the plants turned to war work. In addition, the wood needed fresh varnish every six months, by Chrysler’s own advice. As a result, survivors may number only in the dozens. The Louwman Museum in the Netherlands owns an unrestored 1942 example. According to the museum, it wears its original factory paint and came straight from its first owner. 2. 1947 Chrysler Town & Country sedan When the Town & Country returned after World War II, it was no longer a wagon. Chrysler offered it as a four-door sedan or a two-door convertible. The wood was now a trim of mahogany veneer bonded to steel panels, framed in ash. In effect, that design turned a working wagon into a dressy car for town. Arkansas craftsmen made the wood sections, and Chrysler shipped them to Detroit for hand fitting and final assembly. Hagerty’s history of the model notes that Chrysler made few changes in 1947 and 1948. Of the two, the 1947 sedan in our photo is the less famous body style. Hagerty’s 1947 data lists a 250.6-cubic-inch six-cylinder rated at 114 hp. That is modest power for a heavy car. Even so, the glossy wood makes it look richer, in our eyes, than most sedans of its day. In our view, the sedan earns its place because it is the overlooked twin of the famous convertible. Chrysler dropped the four-door before the 1950 hardtop arrived, so its run was short. Those few years made it a rare sight on today’s show fields. 3. 1948 Chrysler Town & Country convertible The convertible is the postwar Town & Country that most collectors chase. It also paired a folding soft top with the same ash-framed wood sides as the sedan. For 1948, the car carried on with only small changes. Chrysler built fewer than 8,500 convertibles over three years, according to Hagerty. The Classic Car Club of America also recognizes the convertibles as Full Classics. Beyond the badge, part of the appeal is the craftsmanship. Each wood section was hand-fitted to the body in Detroit. That is why, in our view, a restorer needs real joinery skill as well as paint and chrome. Our take: the 1948 convertible is the purest version of the postwar idea. It has genuine wood on the sides, and it shows off the long Chrysler body with the top folded. That mix of luxury, open air and craft is why we think it became the face of the postwar Town & Country. For more wood-bodied cars from the same period, see our list of woodies so rare surf culture couldn’t save them. 4. 1949 Chrysler New Yorker Town & Country convertible For 1949, Chrysler restyled its cars and rebuilt the Town & Country convertible on the New Yorker. The wheelbase grew to 131.5 inches. Meanwhile, the sedan version was gone. This year also brought a change in materials. Hagerty dates the switch from genuine Honduran mahogany panels to DI-NOC, a vinyl film printed to look like wood, to 1949. However, the ash framing stayed real. As a result, the 1949 car looks much like its predecessor from a few feet away, yet it is a different build underneath the varnish. After this season, the convertible did not return. That makes the 1949 the last Town & Country convertible of the woodie era, and the only one on the longer 131.5-inch wheelbase. Our take: the vinyl panels are easy to hold against it, but we think that misses the point. It is the final chapter of a car that defined postwar luxury, and the longer body gives it a more stately stance. If you see one at a show, look closely at the panels. The grain is printed, but the framing around it is hand-shaped ash. 5. 1950 Chrysler Town & Country Newport hardtop The 1950 Newport was a one-year design, and Chrysler built 698 of them. Apart from a couple of 1946 prototypes, it was the only wood-bodied Chrysler hardtop coupe ever made, according to RM Sotheby’s lot notes. By now, however, the wood was pure decoration. Chrysler used an all-steel body and laid ash framing over it, with the panels between painted in the body color. As a result, the compound curves of the frames needed a lot of hand shaping to fit. The car rode on a 127.5-inch wheelbase. Underneath, the Newport carried a 324-cubic-inch Spitfire straight eight rated at 135 hp. It also had four-wheel hydraulic disc brakes, an unusual feature on a 1950 American car. At $4,028, it was Chrysler’s most expensive car outside the Crown Imperial sedans. Hagerty calls this hardtop Chrysler’s last true woodie. In our view, that makes it the bridge between the hand-built era and the steel wagons that followed. The pillarless roof also gave the Town & Country a sporty profile it had never had before. 6. 1956 Chrysler New Yorker Town & Country wagon After the woodies, Chrysler brought the name back on an all-steel wagon in 1951. By 1956, the New Yorker Town & Country sat at the top of the range. In fact, it sat above the Windsor version as a super-premium family hauler. The two wagons were Chrysler’s answer to Buick’s Century and Special Estates. As Curbside Classic points out, Oldsmobile had no wagon from 1950 through 1956. So Chrysler and Buick had the premium wagon buyer largely to themselves. Virgil Exner’s studio styled the 1956 Town & Country. Compared with the busier 1955 car, the 1956 looks restrained and well proportioned. In addition, the chrome side trim gives it a picnic-basket charm. Curbside Classic adds that Buick later left the super-premium wagon class until its 1971 Estate. Chrysler built only about 1,070 New Yorker wagons that year, against roughly 2,700 Windsors. The New Yorker listed at $4,523. Our take: the low numbers and the Exner styling are why we think this wagon grew into a collector favorite. 7. 1957 Chrysler Windsor Town & Country wagon The 1957 Chryslers brought the “Forward Look” to the wagon range, with tall, sweeping rear fins. On the Windsor Town & Country, the fin carried “Windsor” script. By comparison, the New Yorker wagon had seven hash marks. Power came from a 354-cubic-inch Poly-head V8 rated at 285 hp, or 295 hp with the Power Pack option, per Over-Drive magazine’s 1957 fact sheet. Chrysler sold 2,035 Windsor wagons that year, slightly fewer than in 1956. That year also brought two practical firsts for the Town & Country. That year, a rear-facing third-row seat also debuted, which let kids ride backward and watch the road behind. Torsion-Aire torsion-bar front suspension replaced the coil springs, too. Our take: the Windsor is the everyday version, and that is part of its charm. It had the same fins as the costlier New Yorker, which sold 1,391 wagons that year, yet it outsold its big brother. Families bought it to carry groceries and children. That is why, for us, a clean one stands out today: it shows how a family car looked at the height of the fin era. 8. 1978 Chrysler LeBaron Town & Country wagon After the full-size wagon ended in 1977, Chrysler moved the Town & Country name to the mid-size LeBaron wagon for 1978. It rode on the M platform, the same base as the Dodge Diplomat and Plymouth Gran Fury. In fact, its wheelbase and interior dimensions matched the compact Aspen and Volare. The LeBaron wagon brought the wood look back as simulated paneling on its sides. Under the hood, engines included the 318- and 360-cubic-inch V8s. Overall, it was a smaller, more practical idea of a luxury wagon for the fuel-crisis years. Curbside Classic sees it as Chrysler keeping its well-appointed wagon idea alive at a more sensible size. For a very different take on the name, see our look at a classic railroad-themed Town & Country. Our take: these wagons were common in their day and easy to overlook. Today, we think the woodgrain sides make them a favorite of fans of 1970s Mopars. The name then moved to the front-drive K-car LeBaron wagon from 1982 to 1988, and it finally passed to Chrysler’s minivan, which debuted for 1990, according to Hagerty.