When it comes to building a show-stopping vehicle for the SEMA convention, custom fabricators usually have to balance performance engineering with visual shock value. For the crew at South Florida's Salvage to Savage, achieving that shock value meant heavily modifying a highly coveted classic truck—and angering an army of purists in the process. Featured heavily at the Toyo Tires Treadpass during SEMA 2026, the shop's 1968 Chevrolet C10 stepside is a visual masterpiece dominated by a towering supercharger. However, speaking with Autotopia LA, builder Andrew Riviera revealed the pristine origins of the heavily chopped chassis. "It was a barn find, one-owner scenario. We're now the second owner of the vehicle," Riviera explained. "…he drove up to southern Georgia and yanked it out of a barn at like 1:00 in the morning in 40-degree weather and brought it back to the shop, and we just chopped it up". Because clean, one-owner survivor trucks from the late 1960s are incredibly rare, the decision to slice the vehicle apart to build a custom burnout machine did not sit well with traditional enthusiasts. "We definitely got a lot of hate on our YouTube channel," Riviera admitted, before bluntly defending the extreme build. "Yeah, we made it better". Building a 1,200-HP Chevy To make the truck better, Salvage to Savage had one primary design goal: make the engine stack as high as the cab's roofline. Underneath the cut hood sits a massive forged 427-cubic-inch BluePrint Engines motorsports crate motor, equipped with LS7-style cylinder heads. On top of the block, the team stacked a Holley Low-Ram intake, a Tick Performance air-to-water intercooler, and a custom billet spacer. Via: Autotopia LA Crowning the massive tower is a 3.0-liter Magnuson M.O.A.B. supercharger, fed by dual Holley EFI throttle bodies and four custom CNC-machined velocity stacks cut by Origin Wheels. "It's a 1,200 horsepower-capable combination," Riviera noted. However, due to a massive time crunch leading up to SEMA, the truck is currently operating safely below its potential. The supercharger belt is currently under-driven, meaning the massive blower is acting purely as a visual showpiece rather than generating positive pressure. Even while operating naturally aspirated, the forged 427 still generates roughly 620 horsepower at the crank, breathing through a set of nearly symmetrical, equal-length stainless headers fabricated by Nitrodyne. Geared for 200-MPH Wheel Speed While the engine is built for pure horsepower, the drivetrain is engineered entirely around destroying rear tires in the burnout box. The 427 is mated to a heavy-duty FTI turbo 400 automatic transmission utilizing a drag-style reverse manual shifter. Power is sent through a four-inch steel two-piece driveshaft back to a Quick Performance Ford 9-inch rear end. Via: Autotopia LA Because the truck is designed to sit in one spot and violently spin its rear wheels, the rear end is loaded with a tall 3.40 gear ratio. "…between the gearing and the transmission and the final drive ratio we're looking to get close to 200 mph wheel speed when we're burning it down," Riviera revealed. Via: Autotopia LA To keep the truck safely anchored during those high-speed burnouts, the custom interior features a small green button on the center console hooked to a Wilwood brake solenoid. When pressed, the solenoid completely cuts off hydraulic pressure to the rear calipers, allowing the driver to press the brake pedal and lock the front wheels while the rear tires spin freely. From the fully boxed Rev Chassis air-ride suspension to the dual Hellcat fuel pumps staged by the Holley Dominator ECU, the Salvage to Savage C10 is a masterclass in custom engineering—even if it cost the world a pristine barn-find survivor.