Engine swaps are a cornerstone of custom automotive culture, but stuffing a supercharged 6.2-liter Hemi Hellcat V8 into a lightweight Chevrolet S10 crosses the line from a standard garage project into uncharted territory. That was exactly the goal for the man (VICtorious) behind the "Sleepy Joe" S10, who set out to create a 700-horsepower mini truck capable of violent drag strip wheelies. "Have you ever wondered what happens when you take an engine producing over 700 horsepower and put it into a vehicle that weighs considerably less than the car it was originally designed for?" VICtorious asked. "I decided I wasn't going to sit around wondering; I was going to build one". Fitting the massive Dodge engine into the tiny Chevrolet engine bay required extensive fabrication. The team had to cut out the steering pocket, trim the firewall, build custom solid engine mounts, and purchase a specialized Holley rear-sump oil pan to clear the factory steering linkages. Hidden Costs and Catastrophic Failure Custom fabrication quickly drove up the overall cost of the build. Beyond the initial drivetrain purchase, the builder navigated smaller machine expenses, such as modifying the new starter for flexplate clearance. "Cost me about 120 bucks but that Hellcat's going to… happen man," he noted. Via: VICtorious He also had to choose between heavily trimming the firewall or paying over $400 for a smaller supercharger water manifold to create clearance at the back of the engine bay. However, the biggest financial blow occurred on the very first start-up attempt. After wiring the Holley system and firing the engine, the team realized the motor had zero oil pressure. Upon tearing the engine down at Sinister Performance, they found the crank and bearings were completely destroyed. Via: VICtorious "…the oil pump was non-existent basically, and that's why we weren't getting any kind of oil pressure," the builder revealed. To finish the truck, he had to purchase an entirely new, refreshed Hellcat engine out of pocket from a local shop. The Physics of the Hellcat S10 Wheelie When the completed Hellcat S10 was finally taken to the Macholi Regional Raceway for a no-prep drag event, the sheer physics of the build were put to the ultimate test. "Super excited today, it's our first time at a no prep event, and we're taking Sleepy Joe the Hellcat Swap S10," the builder stated as he prepared to launch the truck. Via: VICtorious Putting a 700-plus horsepower supercharged engine into a lightweight, short-wheelbase mini truck creates a massive power-to-weight imbalance. When the driver aggressively launches the truck on the drag strip, the supercharger delivers instant, violent torque to the rear wheels. Because the S10 has incredibly little weight over its front axle compared to the heavy Dodge Challenger the engine was originally designed for, the aggressive acceleration causes extreme weight transfer to the rear. Via: VICtorious As the sticky rear drag tires grip the pavement, the chassis naturally pivots upward around the rear axle, pulling the front tires completely off the ground and forcing the truck into a wild wheelie.