The Mazda ND Miata has never needed big numbers to win fans. Its 2.0-liter four-cylinder makes 181 hp and 151 lb-ft, and a manual car weighs just 2,366 lbs, which is plenty for a tidy, grin-inducing back-road blast with the top down. Someone has now swapped that four-cylinder for a 6.2-liter American V8 with more than three times the power. They also left out traction control entirely, and if that sounds like your kind of trouble, you can actually order one for your own garage. Why The Miata Is The Perfect Modern Cobra Recipe Carroll Shelby’s Cobra recipe was simple: take a small, light British roadster and drop a big American V8 under the hood. The ND Miata fits that brief almost perfectly, with a short wheelbase, a soft top, and a near-even 53:47 weight split from the factory. All it was ever missing was a lot more engine. GM’s LS V8 is the go-to fix for that problem. The Gen III and Gen IV engines are plentiful, compact, easy to work on, and backed by a massive aftermarket, and a 6.2-liter LS3 is much smaller on the outside than its displacement suggests. That’s why “LS swap everything” became a running joke among gearheads. Flyin’ Miata proved the idea on the ND with a V8 conversion nicknamed the Habu. It used a Chevrolet Performance LS376/525 crate engine rated at 525 hp and 489 lb-ft, and it traded the electric power steering for a hydraulic setup. The Colorado shop later ended its ND V8 program to focus on other Miata work. Lawrence Stubbs picked up where Flyin’ Miata left off. After seeing one of its V8 conversions on YouTube, he asked about running the company’s East Coast business, right as it was looking to drop V8 builds altogether. The two struck a deal, and Stubbs kept the V8 Miata alive. Corvette Power Turns The Miata SS Into A Featherweight Muscle Car Stubbs’ company, Sarasota Super Sport Performance, builds the Miata SS around a new Chevrolet Performance LS3 engine. It’s the same 6.2-liter V8 family that powered the 2008–2013 C6 Corvette, where it made 430 hp and 424 lb-ft from the factory. In a recent YouTube video on Driven+, hosts Max and pro racer Sam Maher-Loughnan quote around 560 hp and 460 lb-ft for this car, with roughly 460 hp reaching the rear wheels. Power goes through a Tremec Magnum six-speed manual, which they claim rate as possibly the best manual they’ve tested. Out back sits a Camaro SS 1LE differential with 3.91 gears and a helical limited-slip, connected by custom axles and a custom driveshaft. The body, interior, steering column, and suspension arms are about all that remain Mazda. The V8 Miata Skips The Safety Net And Sounds Incredible Doing It The electric power steering is gone, replaced by a hydraulic system that offers better feel and, more practically, actually fits around the V8. The car also gets powder-coated subframes and a custom center-exit twin exhaust with a valve to quiet things down. According to the review, the whole swap adds only about 200 lbs and keeps the weight split at roughly 52:48. There’s no electronic aids like traction control or stability control, so with a short wheelbase and 560 hp, all the judgment comes from your right foot. One host admits he first suggested adding traction control, then decided the car is better off without it. The review car also wore semi-slick tires that need heat in them before they grip properly. Driving the V8 Miata, they found it a touch soft on track with street brake pads, but lap times were never the point. Stubbs pitches it as a modern-day Cobra for open-top back-road blasts, and they call it the best-sounding car their channel has ever featured. The V8’s bark echoing off the trees on North Carolina’s forest roads left an even bigger impression than its track debut. Buyers supply their own left-hand-drive ND Miata, and Stubbs handles the conversion for $66,900 plus tax, according to the review, which they reckon is fair given the hours that go into each build. The business is also being renamed Lawrence Stubbs Automotive, or LSA. How To Get An LS3 For Your Own Miata Project Chevrolet Performance sells the LS3 as a crate engine, with the base version rated at 430 hp and 425 lb-ft. Stronger options include the LS376/480 at 495 hp and the LS376/525 at 525 hp and 486 lb-ft, which uses an aggressive ASA camshaft built for high revs. The lineup also includes a carbureted LS376/515 rated at 533 hp and a 6.0-liter LS364/450 making 452 hp. Retail prices start around $7,677 for a bare 430-hp LS3 long block, while the complete 430-hp engine carries a $13,529 MSRP. The LS376/525 long block lists at $10,199, and GM quotes $19,157 for a complete LS376/525. Chevrolet also recommends its matching engine controller and harness kit to get the engine running. Chevrolet labels these engines for competition use only, so emissions rules become a real hurdle for a modern Miata driven on public roads. The engine is also the cheap part of the job, since the gearbox, differential, axles, steering, cooling, and wiring are what push a finished conversion toward $66,900. Budget for plenty of fabrication time, too, since very little about this swap is truly bolt-in.