Back in March of 2025, Ford gave us a first look at its newly curated Heritage Fleet—a collection of key vehicles from Ford’s history maintained in such a way as to serve as useful resources for helping Ford’s brands tell their stories and for helping development engineers understand historical context of the products they’re developing. That first look was in a dingy parking garage at the old Glass House headquarters, but it’s recently moved into a former Amazon fulfillment center dubbed the Ford Vault, a space large enough to fully showcase the collection. Ford is still working through the permits and paperwork that will eventually allow visits from the public. While we wait for that to happen, here are some highlights of what’s currently on display. The Mustang pickup of our dreams. Mustang Ute Concept This “concept” was a training exercise, carried out by Ford’s Experimental Vehicle Building Metal Shop to train apprentices in the finer points of concept-car construction techniques. The bed floor is a Ranger part, and original Mustang decklid sheetmetal is incorporated into the tailgate. The exact donor car isn’t specified, but from the doors forward it appears to be a sixth-gen Mustang Shelby GT350. The had never been displayed before October 2026. Ford’s AC Cobra–based Corvette-killer concept. 1963 Ford Cougar II Concept Back at the beginning of Ford’s relationship with Carroll Shelby and AC Cars, it toyed with building a Corvette-killer based on the AC Cobra platform. Toward that end, chassis number CSX2008, with a 260 V-8 and four-speed manual was rebodied in this fetching fiberglass skin and dubbed Cougar II. Its stainless center roof section was removable, and the body featured pressure-relief gates that would open if cabin pressure exceeded 15psi above atmospheric. The stainless targa roof was removable. Penned by Ford VP of styling Eugene Bordinat and McKinley Thompson Jr., the car was displayed as part of Ford’s X-Car group at events like the New York World’s Fair and the Chicago Auto Show, but was ultimately determined to be too expensive for production. Apparently, the concept’s footbox ended up too close to the engine, rendering the concept undrivable. But it did become a popular 1:25-scale model kit. This car is on loan from the Detroit Historical Society. The Convertible version of the Cougar II, a.k.a. the Bordinat Cobra. 1963 Ford XD Cobra Concept This convertible version of the proposed Corvette-killer was built on chassis number CSX3001, which was designated a big-block car but was shipped without an engine. Known as the Bordinat Cobra, this one was developed by Ford’s Corporate Projects Design Office as a product demonstrator for lightweight Royalex, a thermoformed ABS plastic bodywork developed by Uniroyal. Evidently the intended 427 was supplanted by a hi-po 289 and automatic transmission powertrain early on in its life. Dig the Riviera taillamps. This one, though never licensed for road use, was driven extensively by Mr. Bordinat within the Dearborn Proving Grounds. It apparently had a novel three-piece zippered roof that could be detached and stowed neatly inside the rear deck area. Note that, for the sake of expediency, the taillamps are Buick Riviera units, flipped upside down from their original orientation.