Dual beadlocks: what does it mean? CarBuzz has just found two off-road patents from Audi that show exactly what it means. The German brand known for sedans and swanky SUVs is getting ready to hit the dirt and won't be leaving its high-tech ethos behind. Is the world ready for a crab-walking Audi G-Class rival with beadlocks? Audi Designing Off-Road Tech Nobody Else Can Match Audi has just obtained two patents that cover technology specifically meant for off-roading. We're not talking about heading down a smooth dirt driveway to the cottage, either. This is some serious stuff. The first is a new design for a beadlock wheel. Beadlock wheels are used by serious off-roaders because they have a ring and bolt system that mechanically attaches the tire to the wheel. That means it won't come off when you're rock crawling with just a few pounds of air for maximum footprint and traction. Nearly all beadlock wheels use rings and bolts on the face of the wheel to hold the tire in place. Audi's design uses clamps inside the tire to hold it to the wheel. The idea is simple. Instead of a ring that bolts to the wheel face, two rings are installed inside the tire. They are pressed hard against the tire by spacers that bear against both rings from the inside, holding everything in place. There are already designs that use an air bladder inside the wheel to do this, or a large solid spacer that goes around the wheel. Audi's design uses a few smaller spacers that look like thin rods, and the rings can be rubber or plastic, not just metal. If you're wondering how the rings and spacers get in there, you're not alone. The patent doesn't describe how you're going to put two rings in place and add the spacers with a tire mounted, which could be an issue. Active Weight Distribution For Maximum Traction? The second patent is for an "adaptive off-road assistance system." In this case, it's a system to operate the rear axle steering and the air suspension in a way that makes off-road maneuverability and stability much better than standard. Adjusting the air suspension height at each corner lets Audi redistribute weight across each tire. Putting more weight on the tire with the most grip lets you escape slippery or precarious spots without having to get out and winch or risk a crash. Air suspension tweaks could also help level the vehicle if you're on a steep side slope. This makes that dangerous situation a little safer by raising the downhill side and lowering the uphill side. The rear steer adjustment is equally easy and effective. Turn the rear tires opposite the front, and you can sneak around rocks or trees with a tighter turn. Audi also hints that it could "vibrate" the tires back and forth quickly to try to free you from a jam. Like sawing at the steering wheel to try to dig out of snow or sand, but at all four corners. It should be able to do diagonal "crab walk" driving, too. CarBuzz Insight – Why This Matters: We already know Audi is planning to build a serious off-roader thanks to a chatty US official. It will be built at the new Scout plant in South Carolina and may share Scout's platform. Developing technology like this, which even Jeep, Mercedes, and Land Rover do not have, shows that Audi is serious. The end result might not be the wild portal axle Q6 e-tron off-road concept, but it might not be far from it. Patent filings do not guarantee the use of such technology in future vehicles and are often used exclusively as a means of protecting intellectual property. Such a filing cannot be construed as confirmation of production intent. Source: DPMA