Machina Labs uses a robotic manufacturing process to quickly and efficiently build customized metal body panels. The RoboCraftsman platform can either strike custom designs into pre-stamped pieces or fully form new body panels from sheetmetal, with the ability to quickly switch between designs. Machina is pitching the RoboCraftsman platform as a way to increase customization without the need for expensive retooling, and is trying to court OEMs with its Lassen prototype truck. Automotive manufacturing is a laborious, resource-intensive process. While the complex metropolises that are modern car factories work well for high-volume products, it is often prohibitively expensive for automakers to retool these plants to create distinct body panels for limited-production models. Now a California-based company called Machina Labs aims to plug that gap with an innovative metal manufacturing process that promises speed, flexibility, and cost-savings. The entire RoboCraftsman platform neatly folds into two of these large boxes.Caleb Miller - Car and Driver Machina's business is based around its RoboCraftsman platform, which it basically pitches as a factory in a box. The system uses a pair of large robotic arms to perform a variety of tasks on metal panels, from striking designs into pre-stamped panels to fully forming new pieces. The robotic arms are controlled by software that can switch between different projects as quickly as Machina can upload new designs, and the system also scans the completed panel to see if any additional work needs to be done, and to trim, finish, and heat treat the pieces. The entire setup can be folded into two shipping containers that can then be easily transported. Machina Labs was founded in 2019 and so far has mostly served clients in the aerospace and defense industries. But now Machina wants to enter the automotive space, launching a new division called Machina Rebellis. With its RoboCraftsman platform, Machina aims to give automakers a way to skip the costly retooling process, with its technology providing a more efficient method to quickly craft customizable body panels, allowing OEMs to efficiently build more distinctive limited-edition cars. Machina's interest in the automotive world started a few years back when it built a truck called the Anvil, based on the Ford F-150 Lightning, to demonstrate the unique body panels its metalworking machines could produce. While still fairly crude, this early prototype got Toyota's attention, and the Japanese automotive giant is now an investor in Machina Labs via Woven Capital, Toyota's venture capital division. The process has improved vastly since the Anvil was built, and to demonstrate this, Machina Labs created a new show vehicle, the Lassen, which is being shown at the Los Angeles auto show. Based on a Toyota Tacoma, the Lassen wears a unique hood, tailgate, and fenders, showing off the sort of customization that Machina's process is capable of. Machina worked with Callum, the design house formed by Ian Callum, to pen the look of these panels before manufacturing them using the RoboCraftsman platform. While the Lassen isn't a drastic departure from a standard Tacoma, the changes that Machina made would typically take around four to six months to produce via traditional methods, the company said at a media event at its second factory in Chatsworth, California. Using its RoboCraftsman platform, Machina was able to take the Lassen from sketches to a finished product in just two and a half weeks. The Lassen shows off Machina's two main capabilities. The hood and tailgate demonstrate the RoboCraftsman's ability to re-strike pre-stamped panels with custom designs. The Lassen's tailgate has a bold embossed Machina script, while the hood also says Machina and has a topographical map of its namesake, Mount Lassen in California. The RoboCraftsman platform can put just about any design on a metal panel, and Machina also had tailgates on display featuring a retro Toyota design and a Los Angeles Rams logo. The fenders, meanwhile, are entirely new panels formed by the RoboCraftsman, and they have a bulging, powerful look. These fenders started as a sheet of metal—Machina works in both aluminum and steel—before being shaped by the robotic arms. This process is a bit slower than the re-striking process, which can take minutes to complete, but a fully formed panel can be finished within hours. Machina believes its RoboCraftsman platform is best suited to production runs in the hundreds and thousands. This could include special-edition models for large OEMs, or working with aftermarket companies to create body kits and other visual customizations. OEMs can also use Machina's process to quickly create body panels for early pre-production vehicles, typically an expensive and time-consuming part of the development cycle. In the future, Machina also envisions sending its RoboCraftsman units directly to OEM manufacturing sites to speed up the process even further. Over the past decade, high-end carmakers realized there is a lot of money in personalization, leading to a surge of one-off and limited-production supercars, designed to the exacting specification desired by their wealthy buyers. These cars, often hand-built, are incredibly expensive. Machina Labs says that its RoboCraftsman platform could democratize customization, with the speed and flexibility at which it can work allowing automakers to save money and offer personalized details on more ordinary, everyday vehicles. The RoboCraftsman seen striking a new design into a Tacoma tailgate.Caleb Miller - Car and Driver The RoboCraftsman platform provides a way to quickly manufacture custom body panels, and the flexibility to switch among a large number of different projects in a short amount of time. The Lassen serves as a proof of concept as Machina courts automotive companies, and seeing the RoboCraftsman operate in person, we certainly see a space in the automotive world for Machina's quick and flexible manufacturing innovation. ➡️ Skip the lot. Let Car and Driver help you find your next car.