Last year on a road trip, my wife and I were getting down to fumes and pulled in to a remote gas station. You know the type: two lonely pumps and an eerie sense of foreboding. After a couple of (hilarious) comments about soon being victims of a serial killer, she filled the tank, gripping the nozzle tightly and completely ignoring the little metal latch that dangled down. Unless you've never left the state of New Jersey, where people aren't allowed to pump their own gasoline (though diesel is OK), you've probably noticed that little latch while you're filling up. But what's it for, and why are there two or even three spots on the handle for you to stick that metal tab? The evolution follows our country's broader automotive history, and it's an interesting backstory, whether you use the latch or not. I talked to Scott Boorse, the vice president of technical programs and industry affairs at the Petroleum Equipment Institute, to learn more about this ubiquitous, yet mysterious, little gas-nozzle latch. Read on to learn why these metal flaps are so useful and how they started popping up on gas pumps all over the country. Get Reader's Digest's Read Up newsletter for more interesting facts, news, tech, humor and travel all week long. What does the latch on a gas pump actually do? The latch, which Boorse says is actually called a "hold-open clip," allows you to prop open the nozzle so fuel can be dispensed into your car's tank without having to hold it open yourself. It's integrated into the nozzle's auto-shutoff function, so that when the tank reaches its maximum fill level, the pump stops. (More on this coming up.) The clip can be seated in to two or three grooves that sit along the bottom of the nozzle handle. Why is there more than one choice? The different grooves allow people to control the speed of fuel delivery. Hold on—why would anyone want to pump gas slowly? People like options. "When the clips first came out, there were three positions—let's call them low, medium and high," Boorse says. "Manufacturers would typically say that the lowest setting would be the minimum required to make the auto-shutoff function work properly, typically about 6 gallons per minute." But convenience-store owners wanted a faster setting so they could sell more gas. Boorse says when he worked for a high-volume retailer, they wanted a single hold-open-clip setting dispensing at roughly 8 gallons per minute. "We wanted people to get in as fast as they could, fill up all their fuel and leave, so we could get another customer in." So there are some marketing reasons behind the clip settings, Boorse says. That said, there's only so much potential variation; 10 gallons per minute is about the maximum a dispenser can do. Today, it depends on the manufacturer and the end user's requirements, though Boorse says many clips have moved to a two-position configuration. As for pumping gas slower? "Most people want things faster." Did gas pumps always have hold-open clips? No, and it's been an interesting evolution, Boorse says. First came the auto-shutoff feature, which is a safety function built in to the fuel pump so that gas won't spill out when the tank is full. Then came the hold-open clip, which was incorporated into the auto-shutoff in the 1950s; it was added as a convenience for full-service attendants. "Initially, back in the days of full-service attendants, he or she would be doing other tasks," like checking your oil and tire pressure or washing your windshield, Boorse says. But as we moved into an era of self-service, especially into the 1970s and '80s, the hold-open clip became more of a customer convenience feature. That had some drawbacks. What happened next? "With the advent of a convenience-store model, what ended up happening is people would use the hold-open clip to pump their fuel, and then they would leave their vehicle and enter the store," Boorse says. "That was kind of frowned upon by fire marshals." So local jurisdictions often disallowed the clips, thinking customers would be forced to stay with their vehicles. Not so much. "People started sticking all kinds of different things in there so they could go inside the store, use the bathroom or buy a cup of coffee, a newspaper or cigarettes," Boorse says. One of the most common items people used were tennis balls, which did a great job of holding open the nozzle but were less successful at triggering the auto-shutoff. (Other popular hold-open-clip substitutes were Bic lighters, so let that one sink in.) No surprise: Fires and spills at gas stations went up. "Fire marshals were like, 'Now that I actually see this, it's probably better to use the clip,'" Boorse says. Today, most jurisdictions realize the hold-open clip is part of the pump's overall safety function, though he says there are still some "overzealous fire marshals" out there. What are the other benefits to hands-free pumping? Convenience is the main one, but if you have arthritis or hand-strength limitations, the hold-open clip really comes in handy. Boorse says for a typical, 12-gallon gas tank, at 6 gallons a minute on the low setting, you're looking at about two minutes to fill your entire tank. At full speed, you might cut that down to just over a minute. That doesn't sound like much, but if your grip strength is weak, holding open a gas nozzle, even for a minute or two, can feel like an eternity—or even be impossible. Do all pumps have hold-open clips? No, and there's no nationwide requirement to have them. Remember the local fire marshals Boorse mentioned? They're the final word on the legality of hold-open clips within a certain jurisdiction, whether that's a state, county, city, township or whatever. "You'll still run into someone today who will be like, 'We don't allow the hold-open clip in our entire jurisdiction,'" Boorse says. For this reason, manufacturers make gas nozzles with and without hold-open clips. "You can order the nozzle without it," Boorse says. "Or it can also be removed. There are typically two rivets that hold the clip onto the nozzle." (Of course, this would have to be done by an authorized service provider.) Could the gas tank overflow while using the hold-open clip? As long as it's working correctly, no. Boorse stresses that while the hold-open clip is a convenient way to pump gas, its main utility is safety. "The hold-open clip is one part of the overall safety features of the auto-shutoff function of the nozzle itself," he says. Here's how it works. The gas nozzle has a check valve inside of it that allows fluid to flow in a single direction only. At the end of the nozzle (where it enters your car's tank), there's an opening that allows air to flow back toward the check valve, keeping it open. When the gas in the tank reaches the opening, it cuts off the air flow, creating a vacuum that closes the valve and stops the pump. The hold-open clip is designed to give way when this happens. This doesn't mean you can walk away when you use the clip, Boorse says. Getting back in your car can build up static electricity, which can spark a flash fire if you touch the nozzle without discharging the buildup. He also says once people get in their car, they tend to drive away with the nozzle still in the gas tank. "Believe it or not, that happens a lot more than you would think." Sources: