At the 6th Automotive AI Intelligent Chassis Conference 2026 on Nov. 18, Gasgoo reported that Global Technology CTO Dong Zuomin revealed the company is advancing its electro-mechanical braking (EMB) systems for both passenger and commercial vehicles. The firm has developed 120kN and 220kN-class EMB calipers and is now integrating AI technology into product design and vehicle calibration. Dong noted that G-Lub’s EMB program has entered its third year of development, covering applications ranging from compact and mid-to-large passenger cars to pickups, light trucks, and electric commercial vehicles. The high-clamping-force EMB variants target commercial vehicle demands. The system employs a quadruple redundancy architecture—spanning power supply, controller hardware, communication networks, and software algorithms—while the wheel end supports dual power feeds and dual CAN communication. On the precision front, G-Lub’s EMB maintains control error within roughly 4% at high clamping forces, while achieving precision of about 800N in low-force scenarios. Through independent four-wheel braking control, the system enables dynamic braking force distribution, low-speed comfort stops, and vehicle stability control. Dong disclosed that during real-vehicle circle tests at a northeastern winter proving ground, the EMB-equipped vehicle hit a top speed of 84.2 km/h—an improvement over the 80.5 km/h posted by the EHB solution, while lap times dropped from 57.1 seconds to 54.3 seconds. Additionally, G-Lub is exploring regenerative braking during ABS intervention, with solutions supporting recuperation deceleration rates of 0.3g and up to 0.6g. On the AI front, G-Lub has deployed small-scale models internally to assist in designing EMB caliper structures, lead screws, and reduction mechanisms, iterating optimizations through simulation and testing. Beginning in 2025, the company will also explore using AI to analyze data collected from proving grounds, helping engineers screen and refine vehicle calibration parameters. Previously, G-Lub revealed that its EMB has completed multiple rounds of winter and summer calibration trials. Small-scale production is slated for 2025, with mass production scheduled by the end of 2026.