On November 18 that Dr. Qin Tao, System Development Director at BIBO (Hangzhou) Automotive Electronics, made an announcement. At The 6th Automotive Al Intelligent Chassis Conference 2026, he revealed progress on a pure dry Electro-Mechanical Braking (EMB) system. The system uses a 48V architecture. The company is collaborating with clients on integration while advancing Steer-by-Wire, fully active suspension, and XYZ tri-axial fusion control technologies. BIBO (Hangzhou) Automotive Electronics has already built a product portfolio spanning braking, steering, and suspension. Notably, its ESC, One-Box, and intelligent suspension systems have entered mass production. The new-generation pure dry EMB leverages a 48V architecture to support independent wheel control. By shifting software functions upward and employing software-hardware co-design, the system aims to balance safety with cost efficiency. On the integration front, BIBO (Hangzhou) Automotive Electronics is developing One-Box systems in tandem with Rear Wheel Steering (RWS). By utilizing vehicle state estimation, rear steering angles, and differential braking torque distribution, the system can reduce turning radii at low speeds and enhance stability at medium-to-high speeds. It also explores redundant control strategies during partial failure scenarios. Meanwhile, the company is integrating One-Box with Continuous Damping Control (CDC). Using signals such as longitudinal deceleration, yaw rate, and wheel speed, the setup enables anti-dive braking, emergency braking assist, and damping adjustment for rough road surfaces. Qin Tao noted that BIBO (Hangzhou) Automotive Electronics is developing multi-axis coordinated algorithms based on Model Predictive Control, vehicle state estimation, and torque distribution. The goal is to evolve chassis control from single-axis independence to six-degree-of-freedom (6-DOF) global fusion control, eventually exploring cross-domain integration with powertrain and body systems. Public records indicate BIBO (Hangzhou) Automotive Electronics previously partnered with Henglong Group on rear-wheel steering, Steer-by-Wire, and tri-axial fusion. As of April 2026, the company reported cumulative One-Box deliveries exceeding 150,000 units, with orders on hand surpassing 1.5 million.