Kaiser built just 435 production Kaiser Darrin roadsters, plus six prototypes, and then gave up. That tiny number is typical of the open two-seaters that collectors chase hardest. Small makers, short runs and fragile bodies meant few were ever built, and fewer reach the road each year. Some of these cars came from famous names such as Lancia, Alfa Romeo and Fiat. Others came from places you might not expect, including Israel and a Turin coachbuilder you may never have heard of. What links them is a production count that never had a chance to grow. These are our picks: eight rare roadsters that, in our view, are getting scarcer every year as survivors move into collections and museums. The production figures come from period records and auction catalogs. The verdicts are our own opinion. 1. Abarth 750 Allemano Spyder Carlo Abarth founded his company in 1949, and he made his name by turning tiny Fiats into giant-killers. The heart of this car is his 750 engine. Abarth took the Fiat 600’s 633 cc four and enlarged it to 747 cc with a wider bore and a longer stroke. In his 1956 Derivazione tune, output roughly doubled to about 40 horsepower. Abarth then needed an open body for buyers, especially in America. According to the Carrozzieri Italiani archive, Turin coachbuilder Allemano clothed the 750 Spider in 1956, with design credited to Giovanni Michelotti. An earlier attempt with Zagato had not caught on. The result was a small, low roadster built for both the street and club racing. Our take: this is the most obscure car on the list, and that is part of the appeal. No reliable production total exists, so every survivor tends to be a known car with a story. The one in our photo turned up at Lime Rock, which is exactly where these belong. If you ever get the chance to buy one, insist on a documented history, since provenance drives the value. 2. 1954 Kaiser Darrin Howard “Dutch” Darrin had a party trick. He patented a “pocket” sliding door in 1946, and the Kaiser Darrin finally put it into production. Instead of swinging out, the doors slid forward into the front fenders. They looked brilliant. However, they could stick or roll open on hills, and getting in took practice. The body was also fiberglass, making the Kaiser Darrin the second American car with a fiberglass body after the 1953 Corvette. Power came from a 2,638 cc Willys F-head six with 90 horsepower. As Classic & Sports Car reports, the price was $3,668, about $145 more than a Corvette. The same report says the project’s losses were thought to exceed $10 million. After the factory stopped, Darrin bought leftover cars and sold them from his Hollywood showroom. Six got Cadillac V8s, and none of those is known to survive. In our view, that is the clearest sign of how quickly these cars disappear. Classic & Sports Car put a value of $100,000 on a good one in 2024. If you are shopping, check that the doors run smoothly on their tracks. 3. Lancia Aurelia B24 Spider The Aurelia earned a place in history for using one of the first series-production V6 engines. The B24 Spider wrapped that engine in a low, open body by Pinin Farina. It had a panoramic windscreen and, in our eyes, one of the prettiest shapes of the 1950s. Lancia built it only in 1954 and 1955, and just 240 left the factory. The engine displaced 2,451 cc, and the Aurelia carried its gearbox at the rear in a transaxle. Of the 240 Spiders, 181 had left-hand drive. Only 59 had right-hand drive. So if you drive on the left side of the road, the car you want is the rarer of the two. Prices show how hard these are to find now. In 2025, RM Sotheby’s sold a right-hand-drive Spider America in London for £426,875. Our take: with so few built, every B24 Spider that changes hands is an event. A later B24 convertible, built from 1956 to 1958, offers a similar look with more comfort, so consider it if a Spider is out of reach. 4. Sabra Sport The Sabra was Israel’s attempt at a sports car, and it made a splash. Autocars Co., the country’s only volume carmaker, unveiled it at the 1961 New York Auto Show as “the first Israeli sports car.” Britain’s Reliant helped develop it, on the condition that it sell in Britain as the Reliant Sabre. The fiberglass body drew on the Ashley 1172 roadster prototype. Underneath, though, sat a chassis from engineer Leslie Ballamy. At launch, a 1.7-liter Ford four made 61 horsepower, and later versions reached 74 and then 90 horsepower. Most Sabras went to buyers in the United States and Europe, while Reliant handled the British version. Production ran from 1961 to 1968, with only 379 built. In our view, that makes the Sabra one of the most unusual roadsters an American collector can own. Parts sharing with Ford engines helps keep one running. However, a body and trim made in such small numbers will not be easy to replace, so buy the most complete car you can find. Then join an owners’ group before you need help. 5. 1962 Alfa Romeo 2600 Spider Alfa Romeo introduced the 2600 Spider at the 1962 Geneva Motor Show. Carrozzeria Touring designed and built the body, a 2+2 convertible with long, clean lines. It followed the earlier 2000 Spider, but the engine made the bigger news. The 2600 range then stayed at the top of Alfa’s lineup until the 1750 models took over in 1968. That engine was a 2.6-liter straight six with twin overhead cams. Unlike the sedan, the Spider used three twin-choke carburetors, and it made 145 horsepower. It turned out to be the last Alfa Romeo with a twin-cam straight-six engine. Alfa built 2,255 Spiders in total. Of those, 2,152 had left-hand drive, and only 103 had right-hand drive. Our take: the 2600 Spider is the big-hearted grand tourer of Alfa’s 1960s range, and it gets overlooked next to the smaller Giulia cars. That is good news if you are shopping. Still, triple-carburetor six-cylinder engines reward a specialist’s hand. So budget for a proper setup, and look for solid sills before you fall for the paint. 6. Honda S600 roadster Honda launched the S600 roadster in March 1964, back when most Americans knew the company only for motorcycles. Its 606 cc four had double overhead cams and four Keihin carburetors. It made 57 horsepower at 8,500 rpm, which was remarkable for an engine that small. A fastback coupe joined the roadster a year later. The drivetrain, meanwhile, was just as unusual. Power went through a differential to a chain at each rear wheel, much like a motorcycle. According to Hagerty’s look at the S600, the engine revved to a 9,500 rpm redline, and the S600 was the first production car Honda exported. Hagerty also notes that a 1965 roadster set a model record of $109,200 on Bring a Trailer. Honda built 3,912 roadsters in 1964 and 11,284 across three years. Then the S800 replaced it. In our view, the S600 is the car that proved Honda could build a sports car. Hagerty calls its values solidly established, so do not expect a bargain. If you buy one, find a specialist who understands the chain drive and the high-revving engine. 7. 1965 Datsun Fairlady 1500 The Fairlady 1500, known as the SP310, went into production in 1963. It was the first true Datsun sports car. In America, buyers knew it simply as the Datsun 1500. In fact, early cars had a third seat mounted sideways in the back. Power came from a 1.5-liter four borrowed from Nissan’s Cedric sedan. Early cars used a single SU carburetor and made 77 PS. Then, for 1964 and 1965, a twin-SU version raised output to 85 PS. The 1965 update also removed the odd rear seat. Later that year, the 1.6-liter SPL311 replaced it. Datsun built about 40,000 sports cars across the whole roadster line from 1959 to 1970, but the 1500 was only a short chapter. Our take: this is the roadster that set the stage for the Datsun 240Z, and the early three-seat cars are the oddest of the bunch. In our view, the 1965 twin-carburetor car is the best one to drive. Look for a car with solid floors and its original engine, and expect to search for a while. 8. 1967 Fiat Dino Spider The Fiat Dino Spider exists because of racing rules. Ferrari needed to homologate a V6 for Formula 2, and the FIA required at least 500 engines built within 12 months. Instead of building them itself, Ferrari turned to Fiat, which agreed to produce the 500 engines. Fiat then needed a car to put them in. The answer was a roadster by Pininfarina, shown at the Turin Motor Show in October 1966. As a result, its 1,986.6 cc DOHC V6 made 160 PS. Fiat built 1,163 of these 2.0-liter Spiders between 1966 and 1969. In 1969, a 2.4-liter version followed, and only 420 of those Spiders were built. We think the Dino Spider is the most affordable way into a Ferrari-designed engine, although “affordable” is relative now. If you shop, decide first between the purer 2.0-liter car and the rarer, stronger 2.4. Then have a specialist inspect the V6 before you pay, because a Ferrari-designed V6 deserves an expert’s eye. Early cars came from Fiat’s Rivalta plant. From December 1969, the Dino moved to Ferrari’s own line at Maranello.