Following World War II, hot rodders famously repurposed surplus P-38 Lightning airplane belly fuel tanks to build incredibly aerodynamic "Lakester" racers for the dry lake beds of Southern California. Today, original belly tanks are exceptionally rare and fiercely expensive. To recreate that iconic streamliner aesthetic on a budget, the automotive YouTubers at CarsandCameras decided to build their own mini Lakester using a vintage motorcycle sidecar shell they scored at a swap meet for a "couple hundred bucks". While the vision was clear, the engineering reality of dropping a massive V-Twin engine into a tiny fiberglass tub instantly introduced a wave of complex fabrication bottlenecks. The 100-Horsepower Packaging Trap The team opted to power the custom rig with a 1200cc Harley-Davidson V-Twin (sourced from a Buell) that produces roughly 100 horsepower. However, squeezing that massive powerplant into the build proved incredibly difficult. "Packaging is another real challenge, I mean a sidecar designed for a person, not a person plus a battery plus a fuel tank plus steering and wheels and an engine," one of the builders noted. Via: CarsandCameras To make the layout work, the team had to "channel" the body, cutting out the bottom of the fiberglass shell and dropping it directly over a custom tubular steel frame. To maintain the vintage hot rod look and improve foot clearance, they fabricated a traditional straight chassis with a classic drop front axle. Because the heavy, 200-pound engine had to be mounted offset on the side of the narrow chassis, the builders were forced to heavily triangulate the frame to prevent the twisting torque of the V-Twin from ripping the buggy apart under acceleration. The Trailer Parts Hack Standard go-kart components are not engineered to handle the massive side-loads generated by a 1200cc V-Twin. To keep the front wheels from snapping off during hard cornering, the builders resorted to a clever fabrication hack: they used heavy-duty trailer hubs and spindles for the front steering. "I'm surprised we don't see more trailer hubs and spindles being used on, like, bigger buggy projects," the builder observed while unpacking the hefty trailer components. Via: CarsandCameras To make the static trailer parts function as steering components, the team carefully welded custom steering arms onto the spindles, taking extreme care to achieve proper Ackermann steering geometry. Ackermann steering ensures the inside tire turns at a sharper angle than the outside tire, allowing the rigid chassis to corner smoothly without scrubbing speed. The 32 MPH Shakedown The extreme packaging constraints, custom linkages, and heavy-duty welding turned what was originally envisioned as a "three-day build" into a nearly three-week fabrication grind. When the raw, unpainted chassis finally hit the dirt for a shakedown run, the 100-horsepower sidecar proved to be an absolute handful. Lacking any suspension and riding on stiff trailer tires, the vehicle violently bounced over the gravel while struggling for traction. Via: CarsandCameras Despite the rough ride, the builder pushed the throttle. Glancing at his gauge, he noted the speed: "I only went 32, but it was spinning the tires the whole time". While a 32 mph dirt run is just a baseline test, CarsandCameras are confident that once dialed in on the asphalt, the miniature belly tank racer will boast a top speed of well over 100 mph.