Image Credit: Ford.Backup cameras have become one of those features drivers barely think about until they stop working. For thousands of new Ford Ranger owners, that could happen without warning.The problem isn't with the camera itself. Instead, an electrical fault can cause the Ranger's SYNC 4 center display to suddenly go blank, taking the rearview camera image with it.Losing that image while reversing reduces the driver's view of what's behind the truck and could increase the risk of a crash. That's enough to put the issue firmly in recall territory.According to a new safety recall report filed with the National Highway Traffic Safety Administration, Ford is recalling 11,405 model-year 2026 Rangers over the problem. However, there's another complication for affected owners: Ford doesn't currently have a remedy available.A Tiny Component Can Take Out The DisplayImage Credit: Ford.NHTSA's report says affected Rangers may experience an unexpected blank or black SYNC 4 center-stack display. If that happens when the truck is shifted into reverse, the federally required rearview-camera image won't be available.Ford traced the problem to an electrical short circuit on the display's printed circuit board assembly. That short can open the display fuse, cutting power to the 10.1-inch center screen.Investigators traced the short circuit further to a cracked multi-layer ceramic capacitor, or MLCC. According to Ford's recall report, analysis found materials within the capacitor that are suspected of being counterfeit and that don't meet engineering specifications.The affected displays were supplied by Suzhou Dongshan Display Inc. in China. The recalled Rangers were produced between April 21 and September 3, 2026.Ford Started Investigating In AugustFord first became aware of the problem in August after its Critical Concern Review Group began investigating reports of blank screens. Engineers subsequently analyzed affected displays and identified the open fuse and electrical short.Further investigation narrowed the failure down to the cracked capacitor. Because the screen can lose power completely, the issue prevents the rearview-camera image from appearing rather than simply producing a distorted or intermittent picture.Federal safety requirements mandate rear visibility performance when a vehicle is placed in reverse. Ford determined that affected Rangers may therefore fail to comply with Federal Motor Vehicle Safety Standard No. 111 covering rear visibility.There's No Remedy YetImage Credit: Ford.Owners can't simply schedule a dealership visit and have the problem repaired immediately. At the time of Ford's NHTSA filing, a remedy was still under development.Ford plans to notify affected owners by mail, explaining the safety issue and informing them that a solution isn't currently available. A second notification will be sent once the remedy has been developed and owners can take their Rangers in for the necessary work.In the meantime, Ranger owners can check whether their truck is included by entering its VIN into NHTSA's recall database or Ford's own recall lookup tool.The failure ultimately comes down to a very small electronic component buried inside the display hardware. Unfortunately, when that tiny capacitor gives up, one of the Ranger's most important low-speed safety features can disappear along with the screen.If you want more stories like this, follow Guessing Headlights on Yahoo so you don't miss what's coming next.