Japanese carmakers spent the 1980s and early 1990s building family cars and Toyota sedans that simply refused to wear out. Plenty of them were sold as sensible transport, priced to compete and expected to be traded in after a few years. Instead, many kept going for decades, often with more kilometers on the clock than their makers ever planned for. That staying power did not come from luck. It came from simple engines, careful assembly and engineers who tested harder than they had to. Still, not every long-lived Japanese car gets the credit it deserves, because most of them looked ordinary in the showroom. These nine are our picks for the Japanese cars that seem to have been designed to last far longer than anyone expected. Some are humble commuters, while others are executive sedans built for a chauffeur. All of them earned their place on how they were engineered, not on hype. 1. 1991 Honda Accord EXi sedan Honda unveiled the fourth-generation Accord in 1989 for the 1990 model year. In Australia, the range was kept simple: an EXi sedan, an Aerodeck wagon and an EXi sedan with four-wheel steering. Under the hood sat a 2.2-liter, 16-valve, fuel-injected four-cylinder. According to a CarsGuide used-car review, it made 103 kW at 5,200 rpm and 192 Nm of torque. The same review sums up the car as well built and reliable, as long as an owner keeps up the servicing. In fact, one owner reported more than 350,000 km on his car, and another said it used no oil. The catch is the cam belt. Honda called for a change every 100,000 km on cars built after 1990, and skipping it risks serious engine damage. Our take: the EXi was a mid-size sedan with no airbags and no turbo, so it looked like nothing special. Yet it carried four-wheel disc brakes as standard, and its simple single-cam engine is a big reason so many reached huge mileages. If you find one, ask for the belt receipts first. 2. 1994 Honda Civic GLi sedan The fifth-generation Civic debuted in Japan on September 9, 1991, and it won Car of the Year Japan at launch. The sedan rode on a 103.2-inch wheelbase, longer than the hatchback’s. Honda also raised the cowl, which gave the suspension more travel and a softer ride than earlier Civics. In Australia, the GLi replaced the GL in the September 1993 update. According to CarsGuide’s review of the 1992 to 1995 Civic, its 1.5-liter engine made 74 kW. The same review calls the Honda engines, gearboxes, drivelines and diffs robust. One owner’s 1994 manual GLi had covered 240,000 km, and his repair list was mostly wear items such as wheel bearings and a thermostat. In our view, this is the Civic generation many people forget, wedged between more famous hot hatches. However, the plain GLi sedan is the one that shows how tough the basic recipe was. Listen for noisy rear wheel bearings and check the air-conditioning compressor, because those are the known trouble spots. Fans of the badge can also see how it stacks up in our ranking of the top Honda Civics by generation. 3. Toyota Crown S120 The seventh-generation Crown arrived in late 1983 as a sedan, a pillared hardtop and a wagon. It was the first Crown with four-wheel independent suspension, which Toyota branded PEGASUS. Engines included 2.0-liter sixes, the 2.8-liter 5M, a 3.0-liter six and turbo diesels. Then, in September 1985, Toyota added a supercharged version of its 2.0-liter G-series six. The S120 sold in huge numbers. According to Curbside Classic’s look at the S120, Toyota produced over half a million of them across all body styles. The site also notes that the plainest, quad-headlight versions usually went to taxi and fleet duty. That fleet work is the point. A car that spends its life as a taxi has to shrug off endless idling and stop-and-go traffic. Our take: the Crown was an upscale Toyota sedan, yet it was tough enough to serve as a cab. Few survive today, so a clean S120 is worth a long look. 4. 1988 Toyota Cressida GLX sedan Toyota introduced the fourth and final generation of the Cressida, the MX83, in 1988. In North American form, its 3.0-liter 7M-GE inline-six made 190 horsepower at 6,000 rpm and 185 lb-ft of torque. Six-cylinder cars also gained a new double-wishbone independent rear suspension. GLX was one of the trim names Toyota used in some export markets. The Cressida’s real problem was its own family. It looked and felt so close to the new Lexus models that Toyota dropped it in North America after the 1992 model year. Australia kept it until February 1993, when the Vienta replaced it. Meanwhile, the Middle East carried on selling the Cressida until the 1996 model year. In our view, that overlap tells you everything about the build quality. Toyota retired the car because it was too close to a luxury brand, not because it was worn out. If you want a smooth rear-drive Toyota sedan with a six from this era, the MX83 is the one we would hunt for. 5. 1990 Subaru Legacy Subaru introduced the first-generation Legacy in Japan on February 1, 1989. It used the new EJ-series flat-four, an aluminum alloy engine. In the US, the 2.2-liter EJ22 made 135 horsepower at launch. Full-time all-wheel drive was also available from the start. Before sales even began, Subaru set out to prove the car’s toughness in public. In January 1989, its new STi division took Legacy RS sedans to the Arizona Test Center under FIA supervision. The cars ran 100,000 kilometers. According to Legacy Central, three cars finished the run over 18 straight days, and the fastest averaged about 138 mph. Our take: few family sedans ever went on sale with that kind of proof behind them. The Legacy line kept building on that reputation, as we covered in our look at how the 1995 Subaru Legacy GT pushed AWD credibility. A clean first-generation car is a rare find now. 6. 1995 Toyota Avalon XLS Toyota showed the Avalon at the Chicago International Auto Show in February 1994. The first production car came off the line in September 1994 in Georgetown, Kentucky, where workers also built the Camry. Underneath, the Avalon used a stretched version of the Camry platform. That shared hardware is a big part of its long-life reputation. Power came from the 3.0-liter 1MZ-FE V6, rated at 192 horsepower and 210 lb-ft of torque at launch. The XLS sat above the XL, similar to an XLE in other Toyota lines. An optional front bench seat also turned it into a six-passenger Toyota sedan. In our view, the first Avalon was a big American-style sedan with Camry bones, which is why we rate its odds of a long life so highly. It delivered roominess without a fussy luxury drivetrain. If you shop for one today, look for the XLS with its fuller equipment and a documented service history. 7. 1990 Nissan Maxima Ti Nissan revealed the third-generation Maxima, known as the J30, on October 24, 1988. It wore a “4DSC” decal in the window, short for “four-door sports car.” That pitch worked, too. The Maxima SE made Car and Driver’s Ten Best list for 1990. In Australia, the Ti was the top model. It added a rear spoiler, climate-control air conditioning, anti-lock brakes, electric seats and a PIN touch-pad locking system. Its 3.0-liter VG30E V6 made 122 kW and drove through a four-speed automatic. Nissan kept building the J30 there until February 1995. Our take: the VG30E was a proven V6 and the J30 body aged gracefully. That mix makes the Ti a car we would expect to outlive its showroom gadgets. If you find one with working climate control and a healthy automatic, it is worth saving. 8. Toyota Century G50 Toyota redesigned its Century limousine in April 1997. The new car carried a 4,996 cc, 48-valve V12 called the 1GZ-FE, rated at 280 PS. According to Toyota’s own vehicle lineage, it was the first V12 for a Japanese passenger car. The engineering went deep. As Hagerty explains, twin ECUs manage each bank of cylinders on their own, with separate fuel injection and throttle bodies. Hagerty also says Toyota sold the V12 Century from 1997 to 2017 and built just under 10,000. One collector told the magazine his car had been nearly as reliable as a contemporary Camry. In our view, that is the best compliment a V12 limousine can get. As a result, this Toyota sedan for executives and officials had to be one that never let them down. We dug into the engine in more detail when we explained why the Toyota Century V12 still fascinates. 9. 1983 Toyota Camry Liftback DX Toyota started building the first-generation Camry in March 1982 at its Tsutsumi plant. It was a front-engine, front-wheel-drive car with a transverse engine, a first for Toyota. Japanese buyers only ever got a sedan. However, export markets also received a five-door liftback, which is the body style of this 1.8-liter DX. The base 1.8-liter 1S engine made 100 PS and came with a five-speed manual or a four-speed automatic. Exports began in January 1983, and US sales started that March. In other words, this was the car that introduced the Camry name to most of the world. Our take: the liftback is the forgotten body style of a nameplate that later became a byword for reliability. Few remain, and we suspect most went on driving until they simply wore out. By 1985, Toyota had sold 128,000 Camrys in the US.